Coventry Die Head Thread Chaser Sets to suit 3/4 inch (page 2)
$86.95 per set
T-THRD-1-0004 | Prices exclude GST
Product overview
About this machine.
Coventry chaser sets to suit 3/4" die head. Most of these are in new condition. Note: Photo is of sample only.
Published data
Specifications
Scroll horizontally to compare models or capacities. Use these to shortlist. We’ll confirm the specification and configuration against the application.| 3/4" Die Head Size | Thread Form (RH) | Dia / Size x Pitch / TPI | Stock |
|---|---|---|---|
| 3/4" as below | GAS as below | 1/8 x 28 | 1 |
| 1/4 x 19 | 2 | ||
| 3/8 x 19 | 5 | ||
| 3/4 x 14 | 1 | ||
| Metric as below | 8 x 1.0 | 1 | |
| 17 x 4.0 | 1 | ||
| 20 x 1.5 | 2 | ||
| 24 x 2.0 | 1 | ||
| UNC as below | 5/16 x 18 | 1 | |
| 5/8 x 11 | 10 | ||
| 3/4 x 10 | 2 | ||
| UNF as below | 1/4 x 28 | 4 | |
| 5/16 x 24 | 6 | ||
| 7/16 x 20 | 1 | ||
| 3/8 x 24 | 4 | ||
| 1/2 x 20 | 1 | ||
| 9/16 x 18 | 2 | ||
| 5/8 x 18 | 12 | ||
| 1" x 14 | 3 | ||
| WHIT as below | 5/16 x 14 | 1 | |
| 5/8 x 9 | 1 | ||
| 15/16 x 18 | 1 | ||
| 1" x 20 | 1 | ||
| 2" 7/16 x 14 | 3 |