Induma (Italy)
Induma (Italy) IS/43 Turret Mill
$6,000.00
Product Description
Turret milling machine with variable speed milling head and high speed head with tilt.Made in Italy
Tidy condition, runs well
Note: Main milling head spindle speed not selecting low range, coolant pump not working.
- -Features
- Variable speed main head with rpm gauge
- Automatic feed to quill
- High speed Nantong head on back with tilt
- Mechanical feeds in X and Y axis
- Rapid in X,Y,Z
- Slideway lubrication
- Coolant system
- Owners manual
- -Accessories
- 1 Clarkson collet chuck 3MT with 4 collets
Specifications
| Induma | Model IS/43 |
| Table size | 1070mm x 228mm |
| Longitudinal travel of table ( by hand/auto ) | 700/680mm |
| Cross table travel ( by hand/auto ) | 250/230mm |
| Vertical travel of table ( by hand/auto ) | 450/430mm |
| Distance from nose of spindle to top of table, max | 410mm |
| Distance from spindle center to face of column | 680mm |
| Main head Speed range | 60-3950 rpm Variable |
| Main head spindle taper | NT30 |
| Main head quill diameter | 82mm |
| Main head quill travel | 127mm |
| Main head quill automatic feeds | 0.040-0.129 rpm 3 steps |
| High speed head Speed range | 740 - 10,200 rpm 6 steps |
| High speed head spindle taper | 3MT |
| Clarkson chuck collets | 1/4, 3/8, 1/2, 5/8 |
| Main motor | 2hp |
| High speed motor | 0.8hp |
| Power supply | 415 volts / 50 hz / 3 phase |
| Freighting details (L x D x H) | 1600 x 1600 x 2400mm 6.14cubes |
| Weight (approx) | 1500 kg |
